Solaris 212 SMD: Installation Guide
What's in the Box?
Your Solaris 212 SMD package includes the following items:
- 2 x Solaris Light units
- 2 x Mounting screws and wall plugs
- 1 x User manual
Installation Steps
Follow these simple steps to install your Solaris LED Motion Light:
1. Choose the Mounting Location
Select a suitable location for the motion light, ensuring it is positioned in an area that will effectively detect movement and provide the desired lighting coverage. Consider factors such as the detection range, lighting angle, and accessibility to sunlight for the solar panel.
2. Mark and Drill the Mounting Holes
Use a pencil to mark the positions of the mounting holes on the wall or surface where you plan to install the light. Ensure the holes are level and spaced appropriately for the light unit. Using a drill, create pilot holes for the included wall plugs.
3. Install the Wall Plugs
Insert the wall plugs into the pilot holes you created in the previous step. Make sure the plugs are securely in place and flush with the wall or surface.
4. Attach the Light Unit
Align the mounting holes on the back of the Solaris Motion Light with the wall plugs. Insert the provided screws through the mounting holes and tighten them securely into the wall plugs to fix the light in place.
5. Adjust the Positioning
Once the light is mounted, you can adjust the angle and positioning to optimize the detection range and lighting coverage for your specific needs.
6. Power On and Test
Switch the light to the desired mode and observe its operation. Test the motion detection, lighting modes, and overall performance to ensure the Solaris is functioning as expected.
Enjoy Your Solaris Motion Light
With your Solaris 212 SMD installed, you can now enjoy enhanced security, convenience, and illumination in your outdoor spaces. Remember to keep the solar panel clean and unobstructed to maintain optimal performance.