Intelligent Solar Wall Lights – Exterior PIR Motion Sensor

Installation Guide for Intelligent Solar Wall Lights – Exterior PIR Motion Sensor

Installing your Intelligent Solar Exterior Wall Lights is simple and ensures optimal performance for years to come. Follow these easy steps to securely and efficiently set up your lights.

What You’ll Need:

• Solar Exterior Wall Light
• Fixing screws (included)
• Wall plugs (included)
• Adhesive glue (optional for no-drill installation)
• Drill or screwdriver
• Level
• Pencil for marking

Step 1: Select the Ideal Location

Choose a location that receives ample sunlight throughout the day to ensure efficient solar charging. For maximum energy absorption:

• Position the solar panel facing south.
• Avoid areas with overhangs, trees, or other obstructions that cast shadows.
• Ensure the area is free from artificial light sources that could interfere with the dusk-to-dawn sensor.
• For motion sensor functionality, pick a location with clear sightlines and minimal traffic to reduce unnecessary activations.

Step 2: Position the Light for Best Coverage

Hold the solar light against the wall at your desired height and location, ensuring that:

• The motion detection range (5–10 meters) and 120° angle cover the area you want to illuminate.
• The light is positioned to illuminate pathways, driveways, or patios effectively.
• The solar panel is angled toward the sun for optimal charging.

Step 3: Mark the Mounting Holes

Using a pencil, mark the spots for the mounting holes on the wall. Ensure that the light is level before making the marks.

Step 4: Drill Holes and Insert Wall Plugs

Use a drill to create holes at the marked positions.

• If using wall plugs, insert them securely into the drilled holes to provide a stable base for the screws. Ensure they are flush with the wall for a firm hold.

Step 5: Mount the Light

Option 1: Screwing On

• Align the light with the drilled holes and use the provided screws to secure it to the wall.
• Tighten the screws to ensure the light is firmly attached.

Option 2: Gluing On

• Apply adhesive glue to the back of the light where it will make contact with the wall.
• Press the light firmly against the wall and hold it in place as per the drying time specified by the glue manufacturer.

Step 6: Check Alignment

Once the light is mounted, use a level to confirm it is straight and properly aligned. Adjust as necessary before proceeding.

Step 7: Activate the Light

Locate the main on/off switch on the light unit and turn it on. Remove the plastic tab from the remote control to activate it. Use the remote to select your preferred lighting mode or adjust the brightness as needed.

Step 8: Test the Motion Sensor

Walk within the detection range to ensure the motion sensor is functioning correctly. The light should activate when motion is detected and turn off after the set duration.

Step 9: Monitor Performance

Regularly check the light’s performance to ensure it is functioning optimally. Clean the solar panel periodically to remove dirt or debris that may reduce charging efficiency.

Additional Tips:

• For winter months, set the brightness to a lower level to conserve energy and ensure longer-lasting illumination.
• Ensure the light is installed in a location free from excessive moisture or standing water to maintain its IP65 weatherproof rating.
• Position the light away from direct sources of artificial light to prevent interference with the dusk-to-dawn sensor.

By following this guide, you’ll enjoy reliable and efficient performance from your Intelligent Solar Exterior Wall Lights, enhancing the ambiance and safety of your outdoor spaces.