Hybrid Power Solar String Lights - Powerbee Endurance

Installation Guide for the Hybrid Power Solar String Lights

The Powerbee Endurance String Lights are a versatile and easy-to-install lighting solution for your outdoor spaces. Follow these simple steps to set up your new lights:

Mounting Options

Spike Mounting

1. Step 1: Insert the spike directly into the ground where you want to place the solar panel.
2. Step 2: Before pushing the spike into the ground, check the soil's hardness. If the ground is too hard, pour water on the area to soften it.
3. Step 3: Use a strong metal object to make a hole in the ground if necessary, then drive the spike into the hole securely.
4. Step 4: Once the spike is in place, attach the solar panel unit to the spike.

Wall, Fence, and Deck Mounting

1. Step 1: Attach the wall mounting bracket to your desired surface (wall, fence, or decking) using the supplied screws and Rawl plugs.
2. Step 2: Locate the solar panel module and gently push it onto the wall mount until it is fully inserted and secure.

Windowsill Mounting

1. Step 1: Use the shelf stand provided with your lights.
2. Step 2: Place the stand on a sunny windowsill or on the floor outside to ensure maximum sunlight exposure.

Charging and Automatic Operation

The unit will charge whether it is on or off and will come on automatically at dusk.

String Location and Hanging

Avoid Ground Installation: Do not install the light strings directly on the ground.

Support the String: Ensure that the wire is supported every 2-3 LEDs to prevent strain on the delicate copper wiring. Avoid hanging the lights in large loops.

Water Flow Precautions: Ensure that the lights are not positioned where additional water flow can pour onto them, such as on shed or garage fascia without gutters.

Care Around Handrails: If placing the lights on handrails, ensure they are not prone to being kicked or knocked, as the strings are delicate and transport low voltages.

Important Care Instructions

Gentle Treatment Required: The fine copper wiring used in the solar string lights is thinner than in mains-powered lights. Handle with care to avoid damage.

Limit Span Length: Avoid spanning gaps greater than 4-5 LEDs to prevent excessive tension on the wiring.

Secure Installation: Use cable ties to secure the strings in place, minimizing movement and potential damage.

Consider Surrounding Environment:

• Bushes: Avoid hanging lights loosely on bushes, as swaying can cause damage. Secure properly to prevent dislodgment.
• Trees: If spanning lights from branches, ensure adequate support to prevent damage during winter or storms.

By following these installation steps and care instructions, you can enjoy the enchanting glow of your Solar String Lights for many seasons. Proper handling and attention during installation will maximize the lifespan and effectiveness of your solar lighting. Thank you for choosing our solar-powered products!