Pond Liner for Large Ponds | Flexiliner | 108 - 1200 Sq m

30 Days Delivery
RRP: £249.99 Special Price £144.99
-
+
Overview
  • Flexiliner Pond Liner for Large Ponds
  • Strong, Tearproof ,Durable and Flexible
  • More than 30 Pre-Cut sizes available (12 x 9 m - 40 x 30 m for large ponds)
  • UV stabilised and rot resistant coating on each side of the liner
  • 30 years Guarantee
Overview
  • Flexiliner Pond Liner for Large Ponds
  • Strong, Tearproof ,Durable and Flexible
  • More than 30 Pre-Cut sizes available (12 x 9 m - 40 x 30 m for large ponds)
  • UV stabilised and rot resistant coating on each side of the liner
  • 30 years Guarantee

Pond Liner for Large Ponds Optional Sizes : 108 - 1200 Sq m

Buy Pond Liner for Large Ponds, Flexiliner, 3-ply Tearproof Pond Liners in over 30 Pre-Cut Sizes Guaranteed for up to 30 yrs. Now Fast FREE UK Delivery

The Flexiliner pond liner is manufactured out of 3 layers - 1 LDPE layer between two coatings of UV resistant laminate

Flexiliner pond liners are flexible, strong and durable with a strength enhancing UV stabilised and rot resistant coating on each side of the liner.

It is tear-proof so if the liner gets punctured the hole will not 'run'.

Need to know the Size of Pond Liner and Underlay You need?

Use Our Pond Liner Calculator

Rate this product
0/5
0 Reviews

Please rate this product, describe its advantages and disadvantages, please share your impression about its use

Create a review
Pre-cut Yes ( 12 x 9 m - 40 x 30 m for Large ponds )
Thickness 0.35mm
Tear-proof Yes
Colour Black
UV resistant Yes
Brand PondXpert
Rate this product
0/5
0 Reviews

Please rate this product, describe its advantages and disadvantages, please share your impression about its use

Create a review

- Dig the hole to the required shape for the liner, taking care to make the sides sloping rather than vertical. To create planting areas for marginal plants leave steps from 20 cm to 40 cm deep as required . For a perfect finish, ensure that the top edge of the pool is level. This will make edging the pool easier with minimal visible liner exposed.

Pond liner installation Step 1

- Ensure the pool area is free from sharp stones, place underlay on the base and sides of the excavation and then place the liner in position. Should you need to tread on the liner remove shoes to avoid piercing. Lightly anchor the liner in position with bricks evenly distributed around the edge of the liner, not the excavation.

Pond liner installation Step 2

- Run water into the pool gradually, at the same time pulling and tucking the liner into shape to ensure a neat finish. You'll notice that the liner will stretch at first, then as the weight of water increases, it will mould itself to the shape of the sides. Fill the pool completely, checking that the liner fits closely all round. Leave overnight, to ensure proper settlement of the liner. Trim off excess liner around the pool with scissors or a knife, leaving 30cm overlap for anchorage.

Pond liner installation Step 3

- After a week you can complete your pool by edging in stone, or paving as desired, allowing for a small overhang to hide the liner from direct sunlight. For a different effect, grass turf can be used, which may overhang and touch the water.

Pond liner installation Step 4

No Questions
Сonsultation
If you have questions, please ask, do not hesitate,we are always happy to help you
Click to Ask a Question

Ask Question About

We found other products you might like!